王元清

职称:教授
电话:010-62788623
传真:010-62782708
邮箱:wang-yq @tsinghua.edu.cn
通信地址:北京市海淀区清华大学土木工程系
邮编:100084

教育背景

1993.11 - 1995.11      清华大学           土木工程系                          博士后;

1989.11 - 1993.11      第聂伯罗彼得罗夫斯克建工学院(前苏联)    博士;

1989.08 - 11              清华大学           水利工程系                           硕士;

1982.09 - 1987.07      清华大学           水利工程系                          本科;

工作履历

2007.01 -                  清华大学土木工程系                  博士生导师

2006.12 -                  清华大学土木工程系                  教授

1998.06 - 2006.12     清华大学土木工程系                  副教授

1995.11 - 1998.06     清华大学土木工程系                  讲师

1987.07 - 1989.08     西安能源部西北勘测设计院        助理工程师;

研究领域

钢结构的断裂、疲劳与损伤研究

高层与大跨钢结构抗震性能与设计理论研究

建筑幕墙新技术及其工程应用

高性能钢材钢结构应用技术研究

结构非线性材料性能与应用研究

轻型钢结构分析与设计研究

钢结构的检测与加固技术研究

桥梁结构设计、施工与安全性评定研究

大型复杂钢结构建筑施工技术研究

特种钢结构的应用技术研究

装配式工业化建筑结构体系与施工技术研究等

科研项目

1、国家自然科学基金(国家重大科研仪器研制项目)  深地兆电子伏能区太阳中微子观测站  2022.01-2026.12

2、国家自然科学基金(面上项目)  不锈钢环槽铆钉连接的铝合金多层框架结构抗震性能与设计方法研究  2022.01-2026.12

3、住房和城乡建设部研究开发项目(支撑建筑产业转型升级) 有机玻璃在建筑与结构领域的应用技术研究  2020.08-2024.07

4、国家自然科学基金(面上项目) 单桩式海上风机钢塔架结构在风浪联合作用下安全性能研究  2019.01-2022.12

5、国家自然科学基金(面上项目) 铝合金结构环槽铆钉连接受力机理及其梁柱节点承载性能研究  2019.01-2022.12

6、国家重点研发计划项目  高性能建筑结构钢材应用关键技术与示范  2018.12-2021.12

7、国家自然科学基金(面上项目) 基于断裂力学与微观机理的钢结构构件和节点断裂评定技术研究  2017.01-2020.12

8、清华大学自主科研计划课题(学科交叉专项) 超大型中微子探测器结构选型与关键技术研究  2014.01-2016.12

开设课程

《钢结构-基本构件》

《钢结构-工程与设计》

《钢结构课程设计》

《建筑结构(建筑类)》

《工程结构事故分析》

《钢结构断裂与疲劳分析(研)》

《轻型房屋钢结构(研)》等

学术兼职

中国钢结构协会特邀常务理事、专家委员会委员、钢结构质量安全检测鉴定专业委员会副理事长及专家委员会委员、结构稳定与疲劳分会常务理事、空间结构分会常务理事及索结构专业组委员;

中国建筑金属结构协会钢结构专家委员会专家、铝结构分会副理事长、集成房屋分会专家委员会委员;

中国工程建设标准化协会建筑物鉴定与加固专业委员会副主任委员、钢结构专业委员会委员、空间结构专业委员会委员、轻型钢结构委员会委员;

中国建筑学会建筑幕墙专业学术委员会常务理事及专家委员会委员等。

奖励与荣誉

1、2022年  铝合金空间网格结构分析设计理论与施工关键技术及工程应用   中国建筑金属结构协会科学技术特等奖(第4)

2、2021年  《钢结构加固设计标准》GB 51367-2019  中国工程建设标准化协会标准科技创新一等奖(第2)

3、2018年   保障性住房工业化设计建造关键技术研究与示范 华夏建设科学技术一等奖(第12)

4、2018年   现代不锈钢结构基本设计理论与方法研究及应用  中国钢结构协会科学技术一等奖(第2)

5、2017年   高层和超高层装配式混凝土结构关键技术与应用研究   辽宁省科学技术二等奖(第3)

6、2016年   既有建筑结构检测评定与加固改造关键技术及工程应用  辽宁省科学技术二等奖(第2)

7、2015年   点支式玻璃幕墙与采光顶创新技术及工程应用  山东省科学技术二等奖(第2)

8、2015年   装配式建筑建造标准与应用技术研究  获辽宁省科学技术二等奖(第3)

9、2014年   合肥新桥国际机场航站楼钢结构设计与施工控制关键技术  安徽省科学技术一等奖(第3)

10、2014年  钢-混凝土组合扁梁及其框架的承载性能与设计理论研究   中国钢结构协会科学技术特等奖(第2)

11、2012年  轻钢和网架结构抗风雪灾害可靠性分析及其加固技术应用研究  辽宁省科学技术一等奖(第2)

12、2011年  建筑钢结构新型连接节点与体系的设计理论、关键技术与工程应用   国家科技进步二等奖(第5)

13、2010年  半刚性连接钢结构体系设计理论、关键技术与工程应用研究  山东省科学技术一等奖(第7)

14、2009年  杆系钢结构高等分析设计计算的关键技术及其工程应用 湖南省科学技术奖二等奖(第5)

15、2009年  现代工业建筑钢结构设计理论和计算方法的关键技术及其应用  中国机械工业科学技术一等奖(第2)

16、2009年  高层混合结构体系的关键技术及应用  国家科技进步二等奖(第4)

学术成果

1,王元清,江见鲸,龚晓南,樊健生,崔京浩

《建筑结构事故分析与处理》(第四版)

中国建筑工业出版社,2018.6。

2、王元清,石永久,吴丽丽

《点支式玻璃建筑应用技术研究》

科学出版社,2009.8。

3、石永久,施  刚,王元清,陈  宏

《多高层钢框架梁柱节点-理论与设计》

中国建筑工业出版社,2014.6。

4, Beibei Li,Yuanqing Wang,Ying Zhang,Huanxin Yuan,Xinhang Zhi,Charalampos C. Baniotopoulos.

Flexural behaviour of 7A04-T6 high-strength aluminium alloy SHS and RHS beams under moment gradient.

Engineering Structures. 259(2022):114138。

5、Zhongxing Wang,Yuanqing Wang,Beibei Li,Ying Zhang

Experimental and numerical study on seismic behaviour of aluminium alloy frames.

Journal of Building Engineering [J],50(2022):104231。

6、Yuanqing Wang , Dongdong Xu, Yidu Bu*, Xiaoling Liu, Ming Liu.

Elastic Buckling Analysis of Rectangular Longitudinally Profiled (LP) Steel Plates under Uniform Compression.

Thin-Walled Structures[J],2020,157,107003。

7、Xiaoling Liu,  Yuanqing Wang, Huiyong Ban, Ming Liu,  Veljkovic M., Bijlaard F.S.K.

Flexural strength and rotation capacity of welded I-section steel beams with longitudinally profiled flanges.

Journal of Constructional Steel Research[J],2020,173,106255.

8、Wang ZX,  Wang YQ,  Zhang Y*,   Gardner L, Ouyang Y W..

Experimental investigation and design of extruded aluminium alloy T-stubs connected by swage-locking pins.

Engineering Structures. 2019; 200. 109675

9、Yuanqing Wang,Zongyi Wang,Kang Xu,Xinxi Du,Yongjiu Shi

Experimental and numerical studies on the static and the dynamic behaviors of embedded cable support (ECS) glass facade system.

Engineering Structures[J],2019,178: 521-522

10、Liao Xiaowei, Wang Yuanqing, Zongyi Wang,Shi YongJiu

Investigation on fatigue properties of bridge-steel butt-welded joints at low temperatures.

Engineering Failure Analysis [J],2019,105:597-609.

11、Yidu Bu,  Yuanqing Wang,  Yipeng Zhao

Study of stainless steel bolted extended end-plate joints under seismicloading.

Thin-Walled Structures{J}。2019,144:106255

12、Yuelin Zhang, Yuanqing Wang

The influence of welding mechanical boundary condition on the residual stress and distortion of a stiffened-panel.

Marine Structures [J]. 2019,65: 259–270.

13、Zongyi Wang, Yuanqing Wang,  Xinxi Du, Tianxiong Zhang and Yuekun Heng

Study on the Fracture Properties of the PMMA Structure for the JUNO Central Detector.

KSCE Journal of Civil Engineering [J]. 2019,23(6): 2584-2597.

14、Zhongxing Wang,Yuanqing Wang,Guixiang Zhang,Youjiu Shi

Tests and Parametric Analysis of Aluminum Alloy Bolted Joints of Different Material Types.

Construction & Building Materials,2018,185:589-599.

15、Yuanqing Wang, Xiaoling Liu, Huiyong Ban, Ming Liu, Yongjiu Shi and Yuyin Wang

Deformation behavior at SLS of welded I-section steel beams with longitudinally profiled flanges.

Journal of Constructional Steel Research[J],2018,146:122-134.

16、X.W. Liao,  Y.Q. Wang,  L.Zong

Fatigue crack propagation for Q345qD bridge steel and its butt welds at low temperatures.

Fatigue & Fracture of Engineering Materials & Structures. 2018,41(3): 675-687.

17、Zhongxing Wang,Yuanqing Wang,Jeong Sojeong and Yuanwen Ouyang

Experimental Investigation and Parametric Analysis on Large-Section Aluminum Alloy Columns.

Thin-Walled Structures,2018,122:585-596.

18、X.Y. Liu,  Y. Q. Wang*,  J. Xiong,  H. Zhou  and Y.J. Shi

Study on damage behavior of steel beam-to-column connection under inelastic cyclic loading.

Journal of Zhejiang University-SCIENCE A, 2017,18(11):910-926.

19、Y.Q. Wang, H.X. Yuan, T.Chang,  X.X. Du,  M.Yu

Compressive buckling strength of extruded aluminium alloy I-section columns with fixed-pinned end conditions.

Thin-Walled Structures. 2017,(119):396-403.

20、WANG ZongYi, WANG YuanQing, WANG Zhe, CHEN ShaoMin, ZHANG TianXiong, WANG Jun

Design and analysis of the physical 1-ton prototype of the Jinping Neutrino Experiment.

Nuclear Instuments & Methods in Physisics Research Section A-accelerators Spectrometers Detectors and Associated Equipment [J].2017,855:81-87.

21、Xiyue Liu,  Yuanqing Wang,Xiong Jun and  Shi Yongjiu

Investigation on the weld damage behavior of steel beam-to-column connection.

International Journal of Steel Structures. 2017,17(1):1-17.

22、Zongyi Wang, Yuangqing Wang , Yuekun Heng,  Xinxi Du, Zhonghua Qin

Bearing capacities of the structure and joint of JUNO central detectorr.

Periodica Polytechnica Civil Engineering [J],2016,60(4):561-572.

23、Y.Q.Wang,  Z.X.Wang

Experimental Investigation and FE Analysis on Constitutive Relationship of High Strength Aluminum Alloy under Cyclic Loading.

Advances in Materials Science and Engineering,2016,(2016-9-15):1-16.

24、Wang Z.Y,  Wang Y.Q,  Liang Y.F,  Du X.X,  Shi Y.J.

Bearing capacity of tempered glass panel in point supported glass facades against in-plane load.

Archives of Civil and Mechanical Engineering [J],2016,16(4):935–948.

25、Y.Q.Wang,  Z.X.Wang,  X.G.Hu,  J.K.Han,  H.J.Xing

Experimental Study and Parametric Analysis on the Stability Behavior of 7A04 High-Strength Aluminum Alloy Angle Columns under Axial Compression

Thin-Walled Structures [J]. 2016,(108):305-320.

26、Y.Q.Wang, Z.X.Wang, F.X.Yin, L.Yang, Y.J.Shi, J.Yin

Experimental Study and Finite Element Analysis on the Local Buckling Behavior of Aluminium Alloy Beams under Concentrated Loads

Thin-Walled Structures [J]. 2016,(105):44-56.

27、Zhao Bo, Wang Yuanqing, Chen Zhihua, Shi Yongjiu

Seismic response and design method of single large span structure to random spatial ground motions.

Advances in Structural Engineering [J] ,2016,19(2):372-389.

28、Yuanqing Wang,Zongyi Wang,Yufan Liang,Xinxi Du,Yongjiu Shi

Study on the stress and failure strength around the hole in point supported glass panels.

Materials and Structures [J],2016(49):4375–4387.

29、Zhao Bo, Wang Yuanqing, Chen Zhihua, Shi Yongjiu, Jiang Yang

Research on the random seismic response analysis for multi and large span structures to multi-support excitations.

Earthquake Engineering and Structural Dynamics. 2015,14(3):527-538.

30、Yuanqing Wang,Xiyue Liu,  Yun Lin and  Shi Yongjiu

Experimental study on fracture toughness of high-strength construction steel and its butt weld.

Advanced Steel Construction. 2015,11(4):440-451.

31、Lili Wu,Yuanqing Wang,Maochao Yan,Yongjiu Shi  and  Hengqiu Zhang

Flexural behavior of in-plane bending glass structures for design method.

J. Cent. South Univ. 2015,22:3133-3140.

32、Yang  Lu,Wang Yuanqing,Shi Yongjiu

Full-Scale Test of Two-Storey Composite Slim Floor under Pseudo-Dynamic and Pseudo-Static Loadings.

Advances in Structural Engineering. 2015,18(2):173-188.

33、Lu Yang, Yuanqing Wang, Jian Guan.Yong Zhang and Yongjiu Shi

Bearing Strength of stainless steel bolted connection.

Advances in Structural Engineering. 2015,18(7):1151-1162.

34、H.X. Yuan, Y.Q. Wang, L.Gardner,  X.X. Du , Y.J. Shi

Local-overall interactive buckling behaviour of welded stainless steel I-section columns.

Journal of Constructional Steel Research. 2015,111:75-87.

35、Wang Yuanqing,  Zong Liang,  Zhu Ruixiang,  Dai Guoxin, Shi Yongjiu

Behavior of I-section steel beam welding reinforced while under load

Journal of Constructional Steel Research. 2015,106:278-288.

36、王元清, 宗 亮, 石永久, 黎红兵, 梁 爽, 完海鹰

钢结构加固技术研究进展与标准编制

《建筑结构学报》,2022,43(10):29-40。

37、支新航,王元清,李贝贝,张  颖,范圣刚,欧阳元文

7075-T6 高强铝合金轴心受压构件局部稳定试验研究

《天津大学学报》(自然科学与工程技术板),2020,55(7):745-753。

38、王元清,孙  洲,王综轶,郑宝锋,汤月生,欧阳元文

结构有机玻璃的工程应用与研究进展

《工程力学》,2022,39(4):001-014。

39、徐冬冬,王元清,刘晓玲,班慧勇,刘  明

纵向变厚度钢板焊接工字形截面受压短柱的局部稳定试验研究

《建筑结构学报》,2022,43(5):13-25。

40、刘晓玲,王元清,徐冬冬,班慧勇,刘  明

翼缘纵向变厚度焊接工字形截面钢梁整体稳定性能试验

《建筑结构学报》,2022,43(5):1-12。

41、叶全喜,王元清,丁大益,张  枫,林  樱

穿心板式钢管混凝土柱-钢梁栓接节点抗震性能试验研究

《土木工程学报》。2021,54(7):24-33,53。

42、张天雄,王元清,陈志华,卜宜都,董  帅,何  伟

高强度不锈钢短尾环槽铆钉力学性能试验研究

《工程力学》。2021,38(suppl.):151-157。

43、黄健鸣,王元清,宗  亮,张亚伟

焊接方式对负载下加固工形截面钢梁残余变形影响的试验研究

《工程力学》。2021,38(suppl.):243-250。

44、徐冬冬,王元清,刘晓玲,班慧勇,刘  明

纵向变厚度(LP)矩形钢板弹性屈曲系数的理论分析

《工程力学》,2020,37(9): 173-183。

45、张  颖,王元清,卜宜都,王中兴,范圣刚,谢  军

轴心受压不等边角铝构件整体稳定试验研究

《天津大学学报》(自然科学与工程技术板),2020,53(12):1236-1242。

46、廖小伟,王元清,吴剑国,石永久

低温环境下十字形非传力角焊缝接头的疲劳性能

《浙江大学学报》(工学版),2020,54(10): 1-9。

47、王元清,关  阳,刘  明,卜宜都、刘希月、顾浩洋

建筑结构钢材及其焊缝循环微观损伤模型的韧性参数校正分析

《工程力学》,2020,37(s1): 20-31。

48、张  颖,王元清,张俊光,欧阳元文

铝合金网壳结构箱型-工字型盘式节点单肢受力性能有限元分析

《工程力学》,2020,37(s1): 130-138。

49、王元清,张  颖,张俊光,欧阳元文

铝合金箱形-工字形盘式节点整体变形性能试验研究

《天津大学学报》(自然科学与工程技术板),2020,53(5):527-534。

50、王元清,顾浩洋,廖小伟

钢结构角焊缝低温抗剪疲劳性能的试验研究

《工程力学》,2020,37(1): 73-79,134。